Round nuts steel

We have all the trapezoidal round nuts steel from TR10x2 to TR80x10 in our on-hand inventory. Because of our large inventory we are able to deliver quickly.

Our trapezoid thread round nuts steel are made of S355, which has a very good weldability. The nuts are made according to DIN103 with a tolerance of 7H and are of top quality.

Use:

Static purposes> trapezoidal round nuts steel in combination with steel of stainless steel spindles are mostly used for static purposes, this means there is no movement under pressure. An example of this is to adjust a construction by means of spindles and nuts. The spindles are rotated on the nuts so that the structure is in the desired way (spirit level). Once the spindles rotate at the right height, they are not to be moved.

Manual dynamic movement> trapezoidal round nuts steel can be used by manual dynamic movement. This is only possible if it is properly lubricated, if not the nut will be galling in the spindle.

Don’t use:

Automatic dynamic movement > round nuts steel on steel or stainless steel spindles which are used for automatic dynamic movement will start galling after a while.

If you need a nut for automatic dynamic movements, we generally recommend our bronze nuts.

https://www.trapezoidal-acme-thread.co.uk/trapeziumdraad-moeren/rondmoeren-brons/

https://www.trapezoidal-acme-thread.co.uk/trapeziumdraad-moeren/flensmoer-brons/

https://www.trapezoidal-acme-thread.co.uk/trapeziumdraad-moeren/zeskantmoer-brons/

Pricelist trapezoidal round nuts steel

When ordering left thread always write “left” full, writing the letter L is also often used for length and therefore not always noticed.

For example: TR16x4 L 36/24 is not unequivocal TR16x4 Left Ø36 L24 leaves little room for ambiguity.

These are trapezoidal nuts in steel S355, which have a very good weldability.

trapezoidal round nuts steel